Product ID:STYRENE/ISOPRENE ABA BLOCK COPOLYMER, 178
MSDS Date:01/01/1992
FSC:9330
NIIN:00N044048
MSDS Number: BSBWJ

SCIENTIFIC POLYMER PRODUCTS INC

6265 DEAN PARKWAY
ONTARIO, NY 14519
US

Emergency Phone: 716-265-0413

Info Phone: 716-265-0413

Cage: 0MUG0

SCIENTIFIC POLYMER PRODUCTS INC

ONTARIO, NY 14519 US

Telephone: 716-265-0413

Cage: 0MUG0

STYRENE/ISOPRENE, ABA BLOCK COPOLYMER

CAS: 25038-32-8

Fraction By Weight: >98%

OSHA PEL N/K

ACGIH TLV: N/K

TALC (POWDER) CONTAINING NO ASBESTOS FIBERS; (TALC)

CAS: 14807-96-6

RTECS: MW2710000

Fraction By Weight: 0-1%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST

ANTIOXIDANT/STABILIZER

Fraction By Weight: < 1%

OSHA PEL N/K

ACGIH TLV: N/K

SILICA GEL; (HYDRATED SILICA)

CAS: 63231-67-4

RTECS: VV7340000

Fraction By Weight: 0-1%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE MILD SKIN AND EYE
IRRITATION. MILD MECHANICAL IRRITATION TO THE NOSE, THROAT AND
RESPIRATORY TRACT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:IN ALL CASES, IF IRRITATION DEVELOPS, SEEK MEDICAL
ASSISTANCE. INHAL: REMOVE FROM EXPOSURE. IF BREATHING STOPS, BEGIN
MOUTH TO MOUTH. EYES: FLUSH WITH WATER FOR AT LEAST 15 MIN. SKIN:
WASH AFFECTED AR EA WITH SOAP AND WATER. REMOVE DIRTY CLOTHING.
INGEST: CALL MD IMMEDIATELY .

Extinguishing Media:WATER, DRY CHEMICAL, FOAM, CO2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . DO NOT USE DIRECT WATER SPRAY, MAY SPREAD
MOLTEN MATERIAL.

Spill Release Procedures:SWEEP UP MATERIAL AND PLACE IN CONTAINER FOR
DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN DRY PLACE. KEEP CONTAINERS
CLOSED TO PREVENT CONTAMINATION. OPEN CONTAINERS ONLY IN
WELL-VENTILATED AREA.
Other Precautions:MATERIAL CAN ACCUMULATE ELECTROSTATIC CHARGES WHEN
RUBBED, CHAFED AND ABRADED. EQUIPMENT USED SHOULD PROVIDE MEANS TO
DISSIPATE CHARGE. NOTE: THIS MATERIAL IS INTENDED FOR LAB USE ONLY.
NOT SOLD OR IN TENDED FOR DRUG, HOUSEHOLD/OTHER USES.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST ADEQUATE.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED SAFETY GOGGLES.
Other Protective Equipment:EYEBATH AND/OR SAFETY SHOWER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Spec Gravity:0.92
Solubility in Water:NIL
Appearance and Odor:CRUMBS

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:UV LIGHT.
Hazardous Decomposition Products:HYDROCARBONS, CO, CO2.

Waste Disposal Methods:INCINERATE IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.